Lonna Nash asked 3 weeks ago
Ghost Immobiliser Problems and Solutions
Cars are expensive items that we spend years saving for. It can be very traumatic when your joy and happiness is stolen.
If you’ve had the ghost immobiliser installed by a reputable fitting company such as Car Theft Solutions, it can prevent thieves from taking your vehicle in just a few minutes.
1. No stop/start
The autowatch ghost immobiliser fitting Ghost CAN Immobiliser was designed and developed as one of the most effective security systems on the market. The system works by using the buttons on the steering wheel, center console and pedals to enter an encrypted pin code within the vehicle’s system. This will disable the engine. This prevents thieves from stealing your vehicle even if he has keys or fob.
The Ghost is also protected by high-security measures to guard against the device from being stolen by thieves or hacked. This includes CAN bus blocking and a physical cut to the immobiliser. Together with an insurance approved marking system, the odds of your car being stolen are almost zero.
The system works with the factory-installed immobiliser of your vehicle, to add a secondary layer of security. It stops the thief even if he’s got your key or remote from getting your car started. This protects your resale value as well as keeping you and your family secure.
If your Ghost has stopped functioning, it could be an the result of other issues that are not Ghost-related. To test this try and switch to valet or service mode on your Ghost. This will remove your Ghost from the car and you should be able to start the car. If you’re unable to do this, it could be an issue with your Ghost installation or it could be another issue causing this.
You should never attempt to remove a ghost on your own unless you are an expert. This is because you are working with a delicate and complex system that directly controls your engine. It is dangerous and can cause serious damage if you handle it incorrectly. We recommend that you contact the installer for assistance.
2. No ignition
Immobilisers are commonly used in modern cars to prevent the vehicle from starting if the key does not match the one programmed within. The immobiliser compares the transponder codes stored in the immobiliser against those transmitted by the key. If the codes are the same, the engine will start. However, a number of factors could cause this system fail, such as a lost or stolen key or a damaged or uncoded transponder, and electrical problems like broken immobiliser wiring, which usually encircles the ignition cylinder. Multiple keys can also confuse the codes, for example, a spare or a vehicle with two transponders on one key.
As a result, when the immobiliser is not working properly, it can be difficult to start the vehicle which gives thieves the impression that it’s a malfunctioning system, and they could take off with your pride and joy. This makes it a worthwhile investment for all car owners and especially for those who own luxury vehicles that are difficult to sell after having been stolen or damaged.
The ghost immobiliser is a discrete device that can be hidden virtually anywhere in your car and is therefore undetectable to car thieves. It uses the buttons on your steering wheel, doors or centre console to generate an individual PIN code sequence that you are familiar with, ensuring you are the only one who is able to drive the vehicle. It also operates quietly and does not have LED indicators, meaning a thief will be unaware that it’s there. The Ghost is TASSA certified and Insurance Approved, meaning it can be fitted by an approved installer and help to protect your precious possessions from hacking and key cloning.
3. No engine start
It’s not surprising that people are looking to provide an extra layer of protection. With car thefts increasing and keyless entry vehicles a particular target for thieves, it’s no surprise that people are looking to add an extra layer of security. One of the most effective ways to accomplish this is to install an immobiliser that is ghost-like. This patented device shields your pride and joy from theft and damage by using the most advanced technologies on the market today.
Contrary to traditional systems that depend on LEDs and key fobs, the ghost install (Telegra.ph) is a new generation security system that uses a unique personalised pin code sequence that only you have to enable you to begin your vehicle. The device is connected to your vehicle’s CAN data network and is programmed to safeguard it through buttons on the dash and steering wheel. It will then prevent the engine from running until you enter your pin code before entering it. It’s done quietly, no clicking like other systems. It would be nearly impossible for burglars to spot.
It also disables the stop/start mode if it is required. This will be different on every vehicle, but it is typically as easy as is stalling or locking the gearbox in P. This can be done without or with the anti-hijack activation.
Ghost immobilisers guard your vehicle in a very effective way. They can be used with any key, or even an extra. It will combat all forms of theft from cars, including key cloning and hacking, and ECU swapping. It is also useful for preventing vehicle damage by detecting the sound of a vehicle and altering. It can also safeguard your vehicle’s resale value by making it less appealing to thieves.
4. Keyless entry is not possible.
The last thing any car owner would want to go through is being the victim of their pride and joy taken away. If you’ve put a lot of effort into saving for your vehicle or you’re just the owner of a high-end car that you’re proud to display, having to deal with a vehicle that’s stolen is a very harrowing experience. Fortunately, with the right security system in place, you can secure your vehicle against the most cunning thieves.
In contrast to wheel locks or Faraday bags, Ghost 2 immobilisers can be discreetly installed in your vehicle (without doing any damage to your car) and will only allow your car to start if the unique pin code is entered correctly. This pin code is chosen by you and can be altered at any time you’d like. The device is unique for each vehicle, so that thieves don’t even know that it’s there.
Ghost II links up to the CAN system in your vehicle and communicates with it on the CAN data circuit which means it is not able to be detected by typical thieves’ codes grabbing or RF scanning technology. It isn’t able to be re-enabled by adding a new key or replacing the ECU as only the correct pin code will allow your Lexus to start.
Our TASSA-accredited Ghost 2 immobiliser has been approved by insurance companies. It will provide peace of mind knowing your vehicle is safe from theft via contactless. This will not only assist you to recover any losses that might have been caused by theft, but also make it difficult for potential thieves in the future how to install a ghost immobiliser purchase your vehicle as they will be aware of its anti-theft security feature. This could help you save thousands of dollars in resales value.
5. No alarm
Ghost immobilisers are one that is highly technologically advanced and installed in your vehicle to protect it from being taken. It prevents the engine from starting until you enter a pin-code sequence that only you will know.
This is an excellent security system to prevent theft because unlike the wheel lock or car alarm Ghost immobilisers can’t be cut off, jump started or spoofed. If someone tries to steal your car with this method, he’ll find that the vehicle won’t start and he’ll be forced to leave without it.
Car theft has become more sophisticated, so technology has had to advance to prevent thieves from stealing your joy and pride. It is crucial to secure your vehicle by using ghost-immobilisers. They’re not only affordable but also extremely effective in protecting your vehicle.
They are not noticeable and not noticeable, which means thieves won’t be able to see them. The device can be used with a car tracker, so you’ll always know where your car is and that it’s secure.
The ghost CAN immobiliser is the very first aftermarket CAN bus immobiliser, and it’s designed to protect your vehicle against key cloning, hacking and key theft. It’s also TASSA certified, which means that it’s safe. The device will install itself inside your vehicle at a hidden location, works quietly, doesn’t emit radio signals and is undetectable to the naked eye. The most appealing aspect is that it is less expensive than a normal car alarm, and it will be more effective in preventing thieves from stealing your vehicle in the first place. This will give peace of mind, and make your vehicle more secure than it was before.